Cal. Code Regs., tit. 11 - Revision history

Sysop: /* Chapter 41. Self-Manufactured or Self-Assembled Firearms */

2020-08-09T00:47:30Z

Chapter 41. Self-Manufactured or Self-Assembled Firearms

← Older revision		Revision as of 00:47, 9 August 2020
Line 868:		Line 868:
	2. New subsection (b) filed 1-28-2020; operative 1-28-2020 pursuant to Government Code section 11343.4(b)(3) (Register 2020, No. 5).		2. New subsection (b) filed 1-28-2020; operative 1-28-2020 pursuant to Government Code section 11343.4(b)(3) (Register 2020, No. 5).

	~~==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==~~
	==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==		==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==
	===§5522. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number.===		===§5522. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number.===

Sysop: /* §5507. Definition of Key Terms. */

2020-08-09T00:45:51Z

§5507. Definition of Key Terms.

← Older revision		Revision as of 00:45, 9 August 2020
Line 552:		Line 552:

	Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16460, 16590, 16880, 17170, 17180, 29180, 29182, 30510, 30515 and 30530, Penal Code.		Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16460, 16590, 16880, 17170, 17180, 29180, 29182, 30510, 30515 and 30530, Penal Code.
	==§5507. Definition of Key Terms.==		===§5507. Definition of Key Terms.===
	For the purposes of Penal Code section 29180 and Chapter 41, the following definitions will apply:		For the purposes of Penal Code section 29180 and Chapter 41, the following definitions will apply:

Line 609:		Line 609:

	Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16170, 16520, 16535, 16670, 28220, 29180, 29181, 29182, 29183 and 29184, Penal Code.		Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16170, 16520, 16535, 16670, 28220, 29180, 29181, 29182, 29183 and 29184, Penal Code.

	==Article 3. Self-Assembled Firearms Not Affected by this Chapter==		==Article 3. Self-Assembled Firearms Not Affected by this Chapter==
	===§5508. Firearms Not Affected by This Chapter Pursuant to Penal Code Section 29181.===		===§5508. Firearms Not Affected by This Chapter Pursuant to Penal Code Section 29181.===

Sysop: /* §5507. Definition of Key Terms. */

2020-08-09T00:45:38Z

§5507. Definition of Key Terms.

← Older revision		Revision as of 00:45, 9 August 2020
Line 552:		Line 552:

	Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16460, 16590, 16880, 17170, 17180, 29180, 29182, 30510, 30515 and 30530, Penal Code.		Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16460, 16590, 16880, 17170, 17180, 29180, 29182, 30510, 30515 and 30530, Penal Code.
	=§5507. Definition of Key Terms.=		==§5507. Definition of Key Terms.==
	For the purposes of Penal Code section 29180 and Chapter 41, the following definitions will apply:		For the purposes of Penal Code section 29180 and Chapter 41, the following definitions will apply:

Sysop: /* Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number */

2020-08-09T00:44:05Z

Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number

← Older revision		Revision as of 00:44, 9 August 2020
Line 869:		Line 869:
	==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==		==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==
	==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==		==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==
			===§5522. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number.===
			If the applicant wishes to make changes to the configuration of the firearm while the applicant is manufacturing or assembling the firearm, the applicant may do so as long as all changes are made within the 30-day period following the date the Department issued the unique serial number to the applicant. The applicant shall record all changes made to the firearm in the applicant's original unique serial number application in CFARS when reporting the firearm to the Department. The uploaded digital images shall reflect the final version of the firearm, including any changes that were made to it by the applicant.

			Note: Authority cited: Section 29182, Penal Code. Reference: Sections: 29180 and 29182, Penal Code.

			HISTORY

			1. New article 8 (section 5522) and section filed 5-21-2018; operative 7-1-2018 (Register 2018, No. 21).

Sysop: /* Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms */

2020-08-09T00:38:49Z

Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms

@@ Line 847: / Line 847: @@
 . New section filed 5-21-2018; operative 7-1-2018 (Register 2018, No. 21).
 ==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==
 ==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==

Sysop: /* Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms */

2020-08-09T00:36:58Z

Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms

← Older revision		Revision as of 00:36, 9 August 2020
Line 824:		Line 824:

	Note: Authority cited: Section 29180, Penal Code. Reference: Section 29180, Penal Code.		Note: Authority cited: Section 29180, Penal Code. Reference: Section 29180, Penal Code.

			HISTORY

			1. New section filed 5-21-2018; operative 7-1-2018 (Register 2018, No. 21).

			===§5520. Procedures to Engrave, Cast, Stamp (Impress), or Place the Unique Serial Number on the Self-Manufactured or Self-Assembled Firearm.===
			(a) The Department shall issue a unique serial number to the applicant only if the applicant is eligible to possess or own a firearm. Once the Department issues a unique serial number it shall be applied to the self-manufactured or self-assembled firearm as follows:
			:(1) Upon receiving a Department-issued unique serial number, the applicant may contact a Federal Firearms Licensed Manufacturer (type 07) to have the unique serial number applied to the firearm in a manner consistent with this section and federal law. However, a Federal Firearms Licensee is under no obligation to perform this work. The applicant may also use an unlicensed party to apply the unique serial number and other required markings to the firearm; however, the owner of the firearm shall not leave the firearm unattended with an unlicensed party. Finally, the applicant may personally apply the unique serial number to the firearm if the applicant complies with the requirements set out below in subsection (2) of this section. Proof of the engraved unique serial number on the firearm shall be given to the Department in the form of digital images of the newly serialized firearm. These digital images shall be submitted on CFARS in accordance with the digital image requirement noted in section 5521 of these regulations.
			:(2) The applicant shall legibly and uniquely mark and identify each self-manufactured or self-assembled firearm as follows:
			::(A) By engraving, casting, stamping (impressing), or otherwise permanently placing in a conspicuous location on the receiver or frame of the firearm or causing to be engraved, cast, stamped (impressed) or placed on the frame or receiver thereof the unique serial number. The unique serial number shall be placed in a manner not susceptible of being readily obliterated, altered, or removed, and shall not duplicate any serial number placed by the unlicensed manufacturer on any other firearm. The engraving, casting, or stamping (impressing) of the serial number shall be to a minimum depth of .003 inch and in a print no smaller than 1/16 inch; and
			::(B) By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or placed on the frame, receiver, or barrel thereof certain additional information that is mentioned below. This information shall be placed in a manner not susceptible of being readily obliterated, altered, or removed. The additional information shall include:
			:::1. The model of the firearm, if such designation has been made;
			:::2. The caliber or gauge of the firearm;
			:::3. The manufacturer's first and last name as provided to the Department for recording purposes, when applicable; and
			:::4. The city and state (or recognized abbreviation thereof) where the manufacturer made the firearm.
			:(3) The depth of all markings required by this section shall be measured from the flat surface of the metal and not the peaks or ridges. The height of serial numbers required by paragraph (a)(2)(A) of this section will be measured as the distance between the latitudinal ends of the character impression bottoms (bases).
			:(4) The Department shall deny the applicant's unique serial number application if it determines the above described marking requirements have not been met.

			Note: Authority cited: Section 29182, Penal Code. Reference: Sections 11106, 29180 and 29182, Penal Code.

	HISTORY		HISTORY

Sysop: /* §5508. Firearms Not Affected by This Chapter Pursuant to Penal Code Section 29181. */

2020-08-09T00:33:43Z

§5508. Firearms Not Affected by This Chapter Pursuant to Penal Code Section 29181.

← Older revision		Revision as of 00:33, 9 August 2020
Line 610:		Line 610:
	Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16170, 16520, 16535, 16670, 28220, 29180, 29181, 29182, 29183 and 29184, Penal Code.		Note: Authority cited: Section 29182, Penal Code. Reference: Sections 16170, 16520, 16535, 16670, 28220, 29180, 29181, 29182, 29183 and 29184, Penal Code.
	==Article 3. Self-Assembled Firearms Not Affected by this Chapter==		==Article 3. Self-Assembled Firearms Not Affected by this Chapter==
	==§5508. Firearms Not Affected by This Chapter Pursuant to Penal Code Section 29181.==		===§5508. Firearms Not Affected by This Chapter Pursuant to Penal Code Section 29181.===
	The following firearms are not affected by these regulations and do not have to be recorded with the Department:		The following firearms are not affected by these regulations and do not have to be recorded with the Department:

Sysop: /* §5518. Deadlines to Engrave the Unique Serial Number on the Firearm After Receiving the Electronic Approval Notice from the Department. */

2020-08-09T00:33:07Z

§5518. Deadlines to Engrave the Unique Serial Number on the Firearm After Receiving the Electronic Approval Notice from the Department.

← Older revision		Revision as of 00:33, 9 August 2020
Line 794:		Line 794:
	5. Certificate of Compliance as to 9-26-2019 order transmitted to OAL 12-27-2019 and filed 1-28-2020 (Register 2020, No. 5).		5. Certificate of Compliance as to 9-26-2019 order transmitted to OAL 12-27-2019 and filed 1-28-2020 (Register 2020, No. 5).

			==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==
	===§5518. Deadlines to Engrave the Unique Serial Number on the Firearm After Receiving the Electronic Approval Notice from the Department.===		===§5518. Deadlines to Engrave the Unique Serial Number on the Firearm After Receiving the Electronic Approval Notice from the Department.===
	(a) After the applicant submits an online application, the Department shall notify the applicant of its approval or denial electronically. An automated email will be sent to the applicant notifying the applicant to log on to the applicant's CFARS account to view the determination letter.		(a) After the applicant submits an online application, the Department shall notify the applicant of its approval or denial electronically. An automated email will be sent to the applicant notifying the applicant to log on to the applicant's CFARS account to view the determination letter.

Sysop: /* §5518. Deadlines to Engrave the Unique Serial Number on the Firearm After Receiving the Electronic Approval Notice from the Department. */

2020-08-09T00:30:22Z

§5518. Deadlines to Engrave the Unique Serial Number on the Firearm After Receiving the Electronic Approval Notice from the Department.

← Older revision		Revision as of 00:30, 9 August 2020
Line 817:		Line 817:

	2. New subsections (b)(2)-(b)(2)(B) and subsection renumbering filed 1-28-2020; operative 1-28-2020 pursuant to Government Code section 11343.4(b)(3) (Register 2020, No. 5).		2. New subsections (b)(2)-(b)(2)(B) and subsection renumbering filed 1-28-2020; operative 1-28-2020 pursuant to Government Code section 11343.4(b)(3) (Register 2020, No. 5).

			===§5519. Special Requirements for Engraving, Casting, Stamping (Impressing), or Placing the Unique Serial Number on a Self-Manufactured or Self-Assembled Firearm Made from Polymer Plastic.===

			A firearm manufactured or assembled from polymer plastic on or after July 1, 2018, shall contain its unique serial number on 3.7 ounces of material type 17-4 PH stainless steel. This stainless steel piece shall be embedded within the plastic receiver or frame upon the firearm's manufacture or assembly.

			Note: Authority cited: Section 29180, Penal Code. Reference: Section 29180, Penal Code.

			HISTORY

			1. New section filed 5-21-2018; operative 7-1-2018 (Register 2018, No. 21).

	==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==		==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==
	==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==		==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==

Sysop: /* §5517. 15 Day Period for the Department to Approve or Deny the Applicant's Request for a Unique Serial Number. */

2020-08-08T23:50:54Z

§5517. 15 Day Period for the Department to Approve or Deny the Applicant's Request for a Unique Serial Number.

@@ Line 793: / Line 793: @@
 . Certificate of Compliance as to 9-26-2019 order transmitted to OAL 12-27-2019 and filed 1-28-2020 (Register 2020, No. 5).
 ==Article 6. Deadlines, Instructions for Engraving the Unique Serial Number, and Instructions for Uploading Digital Images of Firearms==
 ==Article 8. Modifying the Firearm During the 30 Day Period After the Department Issues the Unique Serial Number==